Commercial 10' x 20' Tent Package #G
10x20 Expo Tent in Canada with 3 Full Walls and a Table Cover
A sheltered 10x20 booth: this 10x20 (3 x 6 m) pop-up tent has a printed roof, three full walls on the back and ends and a printed 6 ft table cover, on a 40mm hexagonal aluminum frame.
Your team works out of the weather, the table cover is your counter, and there is room for displays and seating. Built for expos, home shows and festivals across Canada.
In the Box
- One 40mm hexagonal aluminum pop-up frame (50mm upgrade available)
- One printed 10x20 (3 x 6 m) roof, printed edge to edge with all 4 valances
- Three single-sided printed full walls (6 m back and two 3 m sides) with hook-and-loop straps
- One printed 6 ft (about 1.8 m) stretch table cover, 4-sided, flame-retardant 180g elastic polyester (table not included)
- Frame carry bag
- Free design setup and print proof
Prefer another style? Same size, your choice of table cover style (stretch, standard or fitted; 4-sided or 3-sided open back). Just note it in Specific Instructions at checkout.
Why Customers Choose It
- Storefront Look: Walls plus a branded counter.
- Extra Floor: Room for racks or seating.
Technical Details
| Tent Size | 10' x 20' (approx. 3 x 6 m) |
|---|---|
| Legs | 6: four corners plus two mid-span |
| Frame | 40mm hex aluminum, 1.2 mm (50mm, 2 mm optional) |
| Footprint | Approx. 594 x 300 cm |
| Overall Height | Approx. 320 to 342 cm |
| Clearance | Approx. 186 to 208 cm |
| Height Settings | 3 positions, about 10 cm apart |
| Roof & Wall Fabric | 600D PU-coated polyester |
| Printing | Dye sublimation, full colour |
| Table Cover | 6 ft stretch, 4-sided, FR 180g elastic polyester |
| Fire Rating | NFPA-701, CPAI-84 |
| Warranty | Frame 2 years, printed fabric 1 year |
Frame weighs about 42 kg (40mm) or 54 kg (50mm), fabric not included.
Frame Comparison
The 40mm frame comes standard. Pick the 50mm heavy-duty frame in the calculator for frequent use or windier sites.
40mm Commercial Frame (Standard)

The standard frame: easy to carry and quick to raise, ideal for regular markets, festivals and trade shows.
50mm Heavy-Duty Frame (Upgrade)

Heavier legs built for frequent use, long event seasons and exposed, windier locations.
*Always weigh down or stake the tent outdoors and lower it in high wind.
Available Upgrades
Select any of these in the calculator:
- 50mm Frame: heavier legs for busy event seasons.
- Two-Sided Walls: print on both sides of every wall.
- Stakes and Ropes: for grass and soil.
- Sand Bags (6): one per leg, for pavement and indoor floors.
- Wheeled Bag: easier transport to your site.
Need more branding? See our canopy accessories for extra walls, feather flags and peak flags.

Tough 600D Fabric, Venue Approved
The roof and three full walls in Package G are printed on eco-friendly 600D PU-coated polyester, a dense woven fabric built for Canadian outdoor events, from hot summer markets to wet spring fairs. The polyurethane coating keeps rain out and helps colours stay vivid, and the fire-rated material meets the safety requirements of most venues, exhibitions and festivals. The table cover is flame-retardant 180g elastic polyester that stretches smooth over the table.
- Fully waterproof fabric with heat-sealed seams.
- Meets NFPA-701 and CPAI-84 fire safety standards.
- Fire certificates available on request for venues.
- 12-month UV fade guarantee to keep colours bright.
Safe, durable and good-looking, event after event.
Your Brand in Full Colour
Put your brand front and centre with full-colour dye-sublimation printing on your custom 10' x 20' (3 m x 6 m) tent, applied seamlessly across the roof, three full walls and table cover. Logos, photos and messages stay sharp and vivid from every angle, so your booth stands out at markets, festivals and trade shows across Canada. Add matching flags to complete your setup.
Clear pricing for every peak, valance and wall.

Why Choose SignageBuzz

- Wind Resistant
- Easy to Clean
- Reusable & Recyclable
- No Tools Needed
- Portable & Light
- Fast Setup
- Cold Resistant to -25°C
- Heavy-Duty Hardware
Your Order, Step by Step
- Pick a Package
- Choose Options
- Place Order
- Send Artwork
- Printing
- Delivery
- Enjoy
How to Prepare Your Package G Artwork
Your package uses three print files: roof, three full walls and table cover. Pick the matching templates below, drop your design onto them and send the files after you order. Vector software such as Adobe Illustrator gives the cleanest edges on logos and text.
File Checklist
- Choose the roof template for your frame size: 40mm or 50mm.
- Use the one-sided wall templates; two-sided walls need the two-sided templates.
- Pick the table cover template for your style; 4-sided stretch is standard.
- We accept PDF, AI, EPS, PSD, PNG, TIF, TIFF, JPG and SVG; PDF and AI are preferred.
- Artwork must match the template dimensions exactly.
- Files up to 200 MB can be uploaded; send us a note for anything bigger.
Tips for a Sharp Print
- Lead with the back wall: it is the panel most people see first.
- Side walls: place a logo near the front edge for aisle visibility.
- Centre the table front: keep the logo above the hem.
- Logo on every peak: keep the roof consistent on all four sides.
- Mind the edges: keep text clear of hems and seams.
- High resolution: 150 dpi at full size, or vector files.
Download Templates
Choose the templates for your frame and printed pieces, then add your artwork before uploading.
Package G Questions from Canadian Customers
Quick answers on contents, printing, artwork, shipping and returns across Canada.
What is included?
A 40mm aluminum frame with carry bag, a printed 10x20 (3 x 6 m) roof, three printed full walls and a printed 6 ft stretch table cover.
Is printing part of the price?
Yes. Every printed piece is done in full colour, and you get a print proof before production.
Can walls be printed on both sides?
Yes. Select the two-sided option in the calculator.
40mm or 50mm frame?
40mm is fine for regular use. The 50mm frame has thicker 2 mm legs and is rated for stronger wind.
How are the walls attached?
Full walls use hook-and-loop straps on the valance and legs.
What table does the cover fit?
A standard 6 ft table (not included). The cover is 4-sided stretch, flame-retardant 180g elastic polyester.
Other table cover styles?
Yes: stretch, standard or fitted, 4-sided or 3-sided open back, same 6 ft size. Note it in Specific Instructions.
How many legs?
Six: four corners plus two mid-span, so use a set of 6 sand bags or stakes.
Are weights included?
No. Stakes, sand bags and a wheeled bag are optional add-ons in the calculator.
Is it waterproof and fire rated?
Yes. Waterproof, UV-resistant 600D polyester rated to NFPA-701 and CPAI-84.
How do I send my artwork?
Upload your files after checkout from your account under your order number. PDF, AI, EPS, PSD, PNG, TIF, JPG and SVG files up to 200 MB are accepted.
No design yet?
Pick a design option in the calculator: Artwork Review (free), Basic Design (free, 2 concepts and 2 revisions) or Premium Design (4 concepts and 5 revisions, price shown in the calculator).
How fast will it ship?
Production takes up to 8 days after proof approval. For a rush, choose Priority Shipping at checkout; the product page shows the earliest delivery date.
Do you ship across Canada?
Yes. We deliver across Canada, all prices are in Canadian dollars, and shipping is calculated at checkout.
Can I return it?
Custom printed parts cannot be returned unless there is a manufacturing error or shipping damage. Unused hardware can be returned within 60 days of delivery, less a 30% restocking fee, with return shipping paid by you.
Can I buy replacement parts later?
Yes. Replacement roofs, full walls and table covers are sold separately and fit the same setup.
What is the warranty?
Frame 2 years, printed fabric 1 year, against manufacturing defects.
Setting Up Package G
Follow the video to stand up the tent, then add the rest of your package:
Steps
- Half open. Pull the frame partly open with a helper.
- Roof on. Drape the printed roof and close the corner tabs.
- Raise. Lock the centre and lift the legs.
- Full walls. Back first, then the sides, strapped to the valance and legs.
- Table. Pull the stretch cover over your 6 ft table.
- Anchor. Add weights or stakes.
Good to Know
- A second person speeds things up.
- Raise the tent before adding walls.
- Dry the fabric before storing.
- Questions? Write to sales@signagebuzz.ca.








