26' x 18' Custom Inflatable Arch
Custom 26' x 18' Inflatable Arch for Canadian Events
This 26' x 18' inflatable event arch measures about 26'3" across and 18'1" high with 31" tubes, and carries your brand from leg to leg. The sealed air frame stays up all day without a blower.
Popular across Canada for large race finishes, motorsport events and fairground gates. Swap the printed cover whenever your campaign changes.
Included
- Printed 26' x 18' arch cover, full-colour dye sublimation
- Sealed white TPU air frame
- Electric air pump
- Steel pins and tie-down straps
- Carry bag and repair kit
- Free artwork setup and a proof
Why Customers Choose It
- Seen from Afar: Logo across the top and down both legs.
- Silent: Sealed air frame; no blower running.
- Overpressure Valves: Protect the tubes on hot days.
- Swap Covers: Change the print, keep the frame.
Technical Details
| Arch Size | 26' x 18' |
|---|---|
| Width | Approx. 26'3" |
| Height | Approx. 18'1" |
| Tube Diameter | Approx. 31" |
| Cover Fabric | 600D PU-coated polyester, 280 gsm |
| Fabric | Waterproof, fire retardant, UV protected |
| Printing | Dye sublimation, full colour |
| Inner Frame | Sealed TPU bladder |
| Base | PVC and hard board |
| Valves | Overpressure on each leg, rapid inflation |
| Included | Pump, pins, straps, carry bag, repair kit |
| Warranty | Frame 1 year, cover 1 year |
Pin and strap the legs outdoors, and deflate the arch in high wind.
Compare Arch Sizes
All eight sizes side by side. The 26' x 18' arch is marked with a check.

| Arch | 13' x 9' | 16' x 10' | 16' x 12' | 20' x 13' | 26' x 16' | 26' x 18' ✓ | 30' x 18' | 33' x 20' |
|---|---|---|---|---|---|---|---|---|
| Width | 13'1" | 16'5" | 16'5" | 19'8" | 26'3" | 26'3" | 29'6" | 32'10" |
| Height | 8'6" | 9'10" | 11'10" | 13'1" | 15'9" | 18'1" | 18'1" | 19'8" |
| Tube | 19" | 24" | 24" | 24" | 31" | 31" | 35" | 35" |
| Cover | 600D PU-coated polyester, 280 gsm, full-colour print | |||||||
| Inner Tube | Sealed TPU bladder | |||||||
| Included | Pump, pins, straps, carry bag, repair kit | |||||||
| Warranty | Frame 1 year, cover 1 year | |||||||
Design Ideas for Your Arch
Simple messages and every printed surface used: that is what makes an arch stand out at Canadian races and events.
- Top: Event name, title sponsor or START / FINISH.
- Legs: Sponsor logos or a short message.
- Two sides: START on the front, FINISH on the back.
- Colours: Full wrap in your brand colours.
- Bold text: Large logos read from far away and in photos.
- Sponsors: Add partner logos for races and festivals.
Pick the Right Size
- 13' or 16': entrances, booths and small races.
- 20': most 5K and 10K start lines.
- 26': road races and festival gates.
- 30' or 33': wide roads and stadiums.
Inside the Arch
A sealed air frame and smart valves keep it standing safely.




Popular Uses
- Race start and finish lines
- Cycling and motorsport events
- Trade show entrances
- Festivals and fairs
- Grand openings and dealerships
- School and charity events




Weather-Ready Printed Cover
Printed on 600D PU-coated polyester (280 gsm) that keeps out rain, resists UV and stays bright through Canadian seasons.
- Waterproof fabric.
- Fire retardant.
- UV-protected print.
- Will not crack or peel.
Your Order, Step by Step
- Pick a Package
- Choose Options
- Place Order
- Send Artwork
- Printing
- Delivery
- Enjoy
How to Prepare Your Arch Artwork
The whole cover is printed. Send your files after ordering and we will prepare the layout and a proof.
File Checklist
- Send your logo and files; we place them on the cover.
- We accept PDF, AI, EPS, PSD, PNG, TIF, TIFF, JPG and SVG; PDF and AI are preferred.
- Ask us by email for the arch template.
- Files up to 200 MB can be uploaded; send us a note for anything bigger.
Tips for a Sharp Print
- Top span: put the main logo across the top.
- Legs: sponsor logos or a short message.
- Bold text: reads from far away.
- High resolution: vector or 150 dpi at full size.
26' x 18' Inflatable Arch: Questions from Canadian Customers
Quick answers on setup, printing, artwork, delivery and returns.
What comes with the arch?
The printed cover, the sealed TPU frame, an electric pump, steel pins, tie-down straps, a carry bag and a repair kit, plus free artwork setup and a proof.
How big is it?
26' x 18': about 26'3" wide and 18'1" tall, with 31" tubes.
Does a blower run all the time?
No. The frame is sealed; inflate it once with the included pump and unplug.
How fast is setup?
A few minutes to inflate. Two people help with the bigger sizes.
Can I use it outside?
Yes. Waterproof, UV-protected cover. Pin the legs, strap it down and deflate it in high wind.
Is it printed on both sides?
Yes, front, back and both legs.
Can the graphic be replaced?
Yes. The cover unzips, so a new print fits the same frame.
Is it fire retardant?
Yes, the 600D cover fabric is fire retardant.
Which size suits my event?
13' or 16' for entrances and small races, 20' or 26' for most road races, 30' or 33' for wide roads and stadiums.
How do I submit artwork?
Upload your files after checkout. We lay out the arch and send a proof. PDF, AI, EPS, PSD, PNG, TIF, JPG and SVG up to 200 MB.
No design yet?
Pick Artwork Review (free), Basic Design (free) or Premium Design (price shown in the calculator).
How long is delivery in Canada?
Allow at least 10 business days: Priority takes about 10, Express 12, Standard 14 and Super Saver 16. Rates and delivery dates are shown in CAD at checkout.
What is the return policy?
Printed items cannot be returned unless there is a manufacturing error or shipping damage. Unused hardware can be returned within 60 days of delivery, less a 30% restocking fee, with return shipping paid by you.
Is there a warranty?
Yes, 1 year on the frame and 1 year on the printed cover against manufacturing defects.
Setting Up Your Inflatable Arch
No poles, no tools: inflate it and it stands.
Steps
- Lay it out. Unroll the arch flat.
- Attach the pump. Open the rapid valve and connect the pump.
- Inflate. Fill until firm; close the valve and unplug.
- Secure it. Pin the legs and fix the tie-down straps.
- Deflate and store. Open the valves, fold it into the base bag, store dry.
Tips
- Two people help with arches 20' and wider.
- Dry the cover before storing.
- Keep the overpressure valves clear.
- Questions? Email sales@signagebuzz.ca.






